NSW Cadastre History Service

Content Title	NSW Cadastre History Service
Content Type	Hosted Feature Layer
Description	The NSW Cadastre web service is a dynamic map of cadastral features extracted from the Land Parcel and Property theme of the NSW Foundation Spatial Data Framework (FSDF). Spatial datasets collected with time information can show what happened at a specific time, or what may happen in the future. By animating time-based data, it can be visualised at each step, highlighting patterns or trends emerging over time. Spatial Collaboration Portal map layers that are time enabled include different information for the same location at different times. When a dataset contains time enabled layers, it is “time aware”, and can be configured to display the data during a specific period or to animate the data over a selected time. Time animation can be enabled in the map viewer using the time slider tool. Features included in the NSW Cadastre History Service Lot - Depicts a parcel of land created on a survey plan. Each lot may be represented by standard lots, standard part lots, strata or stratum. Each lot has a lot number, section number, plan lot area, plan number, plan label, ITS title status, and stratum label. Road - Represents dedicated public roads which are open ways for the passage of vehicles, persons or animals on land. The road dataset includes public roads in use. Each road type has a section number, plan number, plan label, ITS title status, road type, road width or Crown/Council width, lot number, and stratum label. Unidentified - Represents a parcel of land that cannot be identified. Crown land, vested, dedicated and severed land may be included in this category as well as Old System lots for which lot/DP identification cannot be found. This dataset also identifies the locations of 100ft wide reserves, ACT regions, closed roads, crossings, surveyed areas, and un-surveyed areas. Water Feature - Represents tidal, non-tidal and ocean waters which form a cadastral boundary. The NSW Cadastre History Service can be used for resource management, environmental management, land use planning, agriculture management, emergency management and recreational purposes. This service can be used to aggregate information for analytical purposes. When used in combination with geocoded address data, imagery, demographic information and agency specific business information, cadastral boundary data underpins the ability to perform high quality spatial analysis. How to use the animated time feature Open the “Map Viewer”. Select the time enabled feature layer from the contents. Select the “Configure” button (the icon to the bottom right that looks like two slider controls) to open time settings. Select “Show Advanced Settings” Choose your desired playback speed Choose a time and date for “Start Time” and “End Time”. Note. Spatial Services digital data range is 2006 through to present so data is unavailable outside this window Choose an appropriate length of one time interval Recommended: “Count: 1” and “Units: Year”. Select “OK” to return to the Map Window. Select the “Play” button which is the small arrow/triangle pointing right which is to the left of the slider. Note: this data is not viewable at all scales, zoom to 1km or better
Initial Publication Date	09/03/2021
Data Currency	01/01/3000
Data Update Frequency	Other
Content Source	Data provider files
File Type	ESRI File Geodatabase (*.gdb)
Attribution	© State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW). For current information go to spatial.nsw.gov.au
Data Theme, Classification or Relationship to other Datasets	NSW Property and Land Parcels Theme of the Foundation Spatial Data Framework (FSDF)
Accuracy	The dataset maintains a positional relationship to, and alignment with, the Lot and Property digital datasets. This dataset was captured by digitising the best available cadastral mapping at a variety of scales and accuracies, ranging from 1:500 to 1:250 000 according to the National Mapping Council of Australia, Standards of Map Accuracy (1975). Therefore, the position of the feature instance will be within 0.5mm at map scale for 90% of the well-defined points. That is, 1:500 = 0.25m, 1:2000 = 1m, 1:4000 = 2m, 1:25000 = 12.5m, 1:50000 = 25m and 1:100000 = 50m. A program to upgrade the spatial location and accuracy of data is ongoing.
Spatial Reference System (dataset)	GDA94
Spatial Reference System (web service)	EPSG:3857
WGS84 Equivalent To	GDA94
Spatial Extent	Full State
Content Lineage	For additional information, please contact us via the Spatial Services Customer Hub
Data Classification	Unclassified
Data Access Policy	Open
Data Quality	For additional information, please contact us via the Spatial Services Customer Hub
Terms and Conditions	Creative Commons
Standard and Specification	Open Geospatial Consortium (OGC) implemented and compatible for consumption by common GIS platforms. Available as either cache or non-cache, depending on client use or requirement.
Data Custodian	DCS Spatial Services 346 Panorama Ave Bathurst NSW 2795
Point of Contact	Please contact us via the Spatial Services Customer Hub
Data Aggregator	DCS Spatial Services 346 Panorama Ave Bathurst NSW 2795
Data Distributor	DCS Spatial Services 346 Panorama Ave Bathurst NSW 2795
Additional Supporting Information	Data Dictionaries
TRIM Number